iv
Command explanations
BridgeModel
Reports model and firmware information about the FibreBridge.
get BridgeModel
BridgeName
Specifies the eight-character ASCII name assigned to the
FibreBridge used to identify individual units. It is not the World
Wide Name. The string is alphanumeric, eight characters long,.
Changes take effect immediately.
Default: “ “
set BridgeName [name]
get BridgeName
ClearEventLog
Clears the contents of the event log. No new entries are
recorded until the operation is completed.
ClearEventLog
Date
Sets/displays the date. The range is 01/01/2000 to 12/31/2099.
Default: 01/01/2000
set Date [MM] / [DD] / [YYYY]
Requires a SaveConfiguration command
get Date
DumpConfiguration
Displays the FibreBridge configuration.
DumpConfiguration
DumpEventLog
Dumps portions of the event log to the ExpressNAV Advanced
page text box, RS-232 or Telnet session. Without parameters
the command will return the newest 2,048 entries. Use caution
when entering “all” or a very large number, since it may take
several minutes to complete
DumpEventLog <all | 1-40,000>
ReadOnlyPassword
Password
get readonlypassword
ReadOnlyUsername
user
get readonlyusername
ResetFCPortErrors
resetfcporterrors 1
RouteDisplay
routedisplay fc 1 1
SASPortList
sasportlist
SASQSFPInfo
get sasqsfpinfo a
SASTargets
sastargets
SaveConfiguration
saveconfiguration restart
SerialNumber
get serialnumber
SerialPortBaudRate
115200
set serialportbaudrate 19200
SNTP
enabled
get sntp
SNTPServer
192.43.244.18 set sntpserver 129.6.15.28
Temperature
get temperature
Time
00:00:00
set time 03:32:30
TimeZone
EST
set timezone pst
Username
root
set username Barbara
zModem
zmodem receive
Command
Default
Example
