ATTO Technology Diamond Array VT, Инструкция по установке и эксплуатации

Страница: 34 / 96

23
ATTO Technology Inc. Diamond Storage Array Installation and Operation Manual
5.0 ATTO ExpressNAV: Browser-based Interface
The easiest way to communicate with the Diamond Storage Array is to use ATTO ExpressNAV, a user-friendly
GUI interface accessed through a browser to control the most common capabilities of the array.
Access ATTO ExpressNAV from any browser that
supports the latest standards for XHTML 1.0 and
CSS1. To take full advantage of the ExpressNAV
interface you should have Java script enabled through
your browser.
Browser compatibility
All pages are written in pure XHTML 1.0 and CSS1 to
be compatible with the latest versions of Internet
Explorer, Netscape, Mozilla (including K-Meleon,
Camino, Mozilla Firefox, Epiphany and Galeon), and
KHTML (including Konqueror and Safari).
Minimum requirement is for Internet Explorer 5.5 and
Netscape 6.2.
To optimize ExpressNAV in Internet Explorer
1 Go to the browser toolbar and click on Tools
2 Click on Internet Options
3 Click on the Security tab
4 Click on the Custom Level button.
5 Click on Microsoft VM, Java permissions
6 Ensure Disable Java is not selected.
7 Click on the Miscellaneous tab.
8 Click on Metarefresh
Opening an ExpressNAV session
1 Obtain the IP address of the array.
2 Type the IP address of the array into the
browser address window.
3 The ExpressNAV interface splash screen is
displayed. Click on
Enter .
4 Enter the username and password set
previously in
ATTO ExpressNAV: Browser-based
Interface
on page 23.
•
The
default username is Diamond
• The default password is Password
5 The product faceplate display appears. Click
the component you want to manage on the left-
hand side menu or go to the Advanced screen
to use the CLI.
Navigating ExpressNAV
All pages are accessible by clicking on their titles on
the left side of the page. You may also go back one
page or go to the
Home
page via the titles on the left
side of the page.
Clicking on any of the red option names will bring up
a help window. After making changes on a page, click
the
Submit
button at the bottom. Clicking this button
is equivalent to typing in all the CLI commands and
then the command
saveconfiguration norestart.