ATTO Technology Diamond Array VT, Инструкция по установке и эксплуатации

Страница: 27 / 96

16
Accessing the array
SNMP
SNMP, or Simple Network Management
Protocol, is an application layer protocol that
allows network devices to exchange management
information. Through a combination of standard
and custom MIBs (Management Information
Base), the Diamond-VT provides status and error
indications to an SNMP server, allowing the
Array to be managed with other devices in a
complex system through a common interface.
You use CLI commands to configure up to six
unique Trap addresses. A trap is a way for the
Diamond-VT to tell the SNMP server that
something has happened.
Exhibit 4.0-1 The POST information displayed after boot of the Diamond-VT.
Initialization Complete
Diamond Storage Array
(c) 2004 ATTO Technology, Incorporated.
Firmware version A21R release date Apr 30 2004, 11:14:42 Build A21R
Power-On Self-Test Completion Status: GOOD
128 Megabytes of RAM Installed.
Interface Port 0 is not installed.
Interface Port 1 is not installed.
Interface 0 World Wide Name = 20 00 00 10 86 10 45 64
Interface 1 World Wide Name = 20 00 00 10 86 10 45 64
Diamond Array Serial Number = “MIDP100463”
Diamond Array Name = “ “
System Serial Number = “ “
Active Configuration = ATTO
DiamondClass = (T)84
Internal Temperature = 25 C [5 - 47]
ErrorLog Contents: NO ERRORS
For help, type HELP.
Ready.