ATTO Technology ATTO FibreBridge 2350C, Инструкция по установке и эксплуатации

Страница: 27 / 109

16
Installation: FibreBridge 2300R/D
Serial port
The RS-232 serial port provides support for
remote monitoring and management through a
command line interface or menu system.
LED indicators
The LED indicators can be viewed from both the
front and the back of the FibreBridge 2300R/D.
Power:
indicates if power is available from the
supply.
FC Activity:
LED blinks to show activity on the
Fibre Channel port (numbered 0). During very
high activity, the LEDs appear to be steadily lit.
2 Gigabit operation:
a lit LED indicates the
FibreBridge is using 2 Gigabit.
SCSI 0 Activity, SCSI 1 Activity:
each SCSI bus
has its own LED to show activity on that bus
(numbered 0 and 1).
Ready:
should light after power has been applied
indicating the FibreBridge is ready to operate.
Exhibit 1.5-1 Physical characteristics
10
inc
he
s (
25
4 c
m)
18.7
25 in
che
s (4
24.8
1 cm
)
1.72 inches
(43.69 cm)
Air vents
Connector side
(see below for details)
Front
Connector side
SCSI Port 2
SCSI Port 1
2 GB operation
Fibre Channel Activity Power
Ready
LEDs
SCSI Port 2
SCSI Port 1
2 GB operation
Fibre Channel Activity
Power
Ready
LEDs
SCSI Port 1
SCSI Port 2
Fibre Channel port
Ethernet port
RS-232 port
Air vent
Power receptacle