ATS MC22LV Series, Руководство пользователя

Страница: 15 / 30

MC22LV SERIES
– MASTER CLOCKS
REV 3/17/15
APPLIED TECHNICAL SYSTEMS
PAGE 14
The Auto Prompt display will advance to the next step (01).
Subsequent steps are entered the same way as the first. Continue until the last step of Basic
Plan #0 is entered. Step 19 (the 20th step) is the last step if you are using the default setting of 20
steps per plan. After entering the last step, the master clock will advance to Basic Plan #1:
The master clock is now prompting you to enter the first of up to 9 alternate plans, plan #1. Plans
1 through 9 are entered the same as plan 0. If you are not using alternate plans 1 through 9, or if
you have just entered your last alternate plan, press [EXIT]. The master clock will return to the
time display.
6.2 CLEARING A PROGRAM STEP
To clear a program step, press BASIC [B], then [ENTER].
The display will prompt you for a plan #(cursor on 0). Choose the basic plan in which the step to
be cleared is located, then press [ENTER].
The display will then prompt for a step #(cursor on 00). Choose the # of the step to be cleared,
then press [ENTER].
The chosen step and its program contents will be displayed.
The cursor will be on the first letter of the day of the week. Press [ENTER]. The cursor will go to
the hour’s position. Enter 00 for the hours. This will clear this specific step. Press [ENTER]. The
display will advance to the next step. If you are finished, press [EXIT]. The display will read:
Choose another plan to edit or press [EXIT] again to return to the time display.
If you wish to erase all the program steps see CLEARING THE ANNUAL AND BASIC
PROGRAMS (Section 6.5).
6.3 ENTERING, REVIEWING OR EDITING THE ANNUAL PROGRAM
[A] [ENTER]
The annual program allows the master clock to be programmed to select any 1 of up to 9
alternate plans. This feature is useful for applications that require a different 7-day plan at
BASIC Plan #0
Step # 00
BASIC Plan #1
Step # 00
BASIC Plan #1
Step # 00
#01 WDY 00:00 AM
Relays: - -