ATS MC22LV Series, Руководство пользователя

Страница: 12 / 30

MC22LV SERIES
– MASTER CLOCKS
REV 3/17/15
APPLIED TECHNICAL SYSTEMS
PAGE 11
5.3 EDITING THE DAY [4] [ENTER]
You must be in the time display. Press the DAY key [4]. The display will respond with:
Press [ENTER]. The display will respond with:
The day of the week may now be entered in the same manner as in the AUTO-PROMPT
sequence. (Section 4.5)
5.4 REVIEWING OR EDITING DAYLIGHT SAVINGS TIME
[7] [ENTER]
You must be in the time display. Press the DST key [7]. The display will respond with:
Press [ENTER]. If daylight savings time not previously set, the display will respond with the
default entries for the current U.S. law as follows:
You may now enter the new daylight savings time settings as outlined in Section 4.6.
5.5 REVIEWING OR EDITING THE RELAY PULSE (MOMENTARY OUTPUTS)
FOR RELAYS 1 and 2
[5] [ENTER]
The pulse is for applications in which only a momentary contact is required (i.e. ringing bells). See
Section 4.7 for more information on pulse settings. Start from the time display. Press key [5].
The display will respond with:
Press [ENTER]. The display will respond with:
The pulse settings for relays 1 and 2 may now be set as outlined in Section 4.7. 0 = Pulse OFF
Command? 04
Press ENTER
Day? Sun
DAY key, ENTER
Command? 07
Press ENTER
S DST M=03 SUN=2
F DST M=11 SUN=1
R1 Pulse= 5 Sec
R2 Pulse= 5 Sec
Command? 05
Press [ENTER].