ATS MC22LV Series, Руководство пользователя

Страница: 13 / 30

MC22LV SERIES
– MASTER CLOCKS
REV 3/17/15
APPLIED TECHNICAL SYSTEMS
PAGE 12
Once you have entered the relay pulse settings the master clock will return to the time display.
5.6 REVIEWING OR EDITING THE BASIC PLAN PROGRAM [B] [ENTER]
If the basic program was not entered during the restart Auto Prompt sequence, it can be entered
by entering the basic program mode. This mode allows the operator to program the daily timed
events. Before entering your program be sure to write it out on a program record sheet. Copies of
the program record sheet are located at the back of this manual. You may need to change the
size of your basic program if it requires more than 20 steps. See SETTING THE MAXIMUM
NUMBER OF STEPS PER PLAN (Section 7.3) for more detail.
Press BASIC [B]. The display will respond with:
The master clock will now advance to the programming sequence.
At this point you can press the [B] key repeatedly to review all stored program steps.
6.0 PROGRAMMING
6.1 ENTERING THE BASIC PLAN PROGRAM
Before you begin programming your MC22LV you should complete the MC SERIES PROGRAM
RECORD SHEET included at the back of this manual. Be sure to enter pulse lengths if required
for all relays (Sections 5.5, 5.6). You may need to change the size of your basic program. See
Section 6.3 for more detail.
See Section 5.8 for information on starting the programming sequence. The display should be
showing:
The cursor will be flashing on the zero for Plan #0. Plan #0 is the first of up to 10 Basic Plans,
each of which contains a 7-day plan.
Plan #0 is the main 7 day plan and plans 1 through 9
are alternate 7 day plans. Alternate plans can be scheduled on an annual basis (more on this in
ENTERING, REVIEWING OR EDITING THE ANNUAL PROGRAM Section 6.3). Press
[ENTER] to select plan #0. The cursor moves to the Step #00 position. Step #00 is the first step
of 20 steps in plan #0 by default (Section 7.3). Press [ENTER] to select step #00 and the display
will read as follows:
Command? 0B
Press ENTER
BASIC Plan #0
Step #00