ATS HGL 120, Инструкция по эксплуатации и техническому обслуживанию

Страница: 35 / 48

LED DESCRIPTION OFF BLINKING ON
LED 1 ON/OFF
Unit is not
energised
Unit in standby Unit is working
LED 2 Column 2
Column 2
Repressurizing /
Column 1 Drying
Column 2 Drying /
Column 1
Regenerating
LED 3
Service advice
Service will be
needed soon
LED 4 Urgent service Service is needed
LED 5 Column 1
Column 1
Repressurizing /
Column 2 Drying
Column 1 Drying /
Column 2
Regenerating
LED 6 Alarm
High dew point
alarm
SPECIFICATIONS
- POWER SUPPLY: 230VAC,50-60HZ ., +/-10%
-
OUTPUTS: n° 5 RELAYS , 230VAC, 5A
- IP PROTECTION : IP65 (only front panel)
- CERTIFICATION: CE
- STOCKING TEMPERATURE: -
40, +50°C
- OPERATING TEMPERATURE:
0 ,+40°C
5.2 STANDARD OPERATION
HGO and HGL have 3 different operating modes.
1. TIMED SEQUENCE CONTROL (STANDARD): the dryer is time controlled.
Every working phase is controlled by one of the parameter of the controller.
The end user can change the value based on the table on chapter 5.3.
2. DEW POINT CONTROL (ENERGY SAVING): the dryer works in Energy
saving mode connected with a dew point sensor. Controller is programmed to
work with 2 different kind of sensors.
Dryer will automatically adjust time of work, but the required dew point value
can be adjusted on the controller.