ATS HGL 120, Инструкция по эксплуатации и техническому обслуживанию

Страница: 28 / 48

1. GENERAL INFORMATION
1.1 FUNCTIONAL DESCRIPTION
The desiccant air dryer is a pressure appliance designed to remove humidity from
compressed air.
It is made of two identical pressure vessels, which are filled with:
-aluminum oxide Al2O3 (for HGO models)
-molecular sieve
+
aluminum oxide (for HGL models)
Alumina is an adsorption-drying agent, which binds humidity.
Molecular sieve is an adsorption agent that binds to smaller molecules of water
vapour
which alumina can’t.
The columns are connected with two aluminium blocks. On the lower block are
located four valves and one silencer.
The valves force the air into the columns in order to dry the air in one vessel and
regenerate the alumina in the second one.
1.2 USE OF THE MACHINE IN SAFE CONDITIONS
Symbols applied on the dryer and manual
General warning Do not touch electrical hazard
Danger - high voltage, electrical
current Prohibition of maintenance to unqualified
personnel
Danger point Environmental requirements
Mandatory consulting the manual Recyclable materials
This system has been designed and manufactured in compliance with the European
safety directive in force, therefore any installation, use and maintenance operations
must be performed respecting the instructions contained in this manual.