ATS E6501S, Руководство пользователя

Страница: 30 / 47

- Page 30 -
- IP Address
: This is the IP address assigned to the LAN port on your E6501S.
The factory default value for this address is 192.168.10.1. This is the address that
will be entered to access the configuration web pages. If you change this value
you must use the new address to access the configuration web pages.
- MAC Address
: It displays the physical MAC address of the LAN port.
SIP - SIP Proxy
: It shows the provisioned SIP proxy provided by your SIP provider
which is used by E6501S for all VoIP calls.
- Register Proxy
: It shows the provisioned Register proxy provided by your SIP
provider which is used by E6501S for registration. If the registration is successful,
the status will be shown in the Registration Status.
- Outbound Proxy
: Some SIP providers will use outbound proxy in order to
allow dialing out outgoing calls. If the outbound proxy address is input in the SIP
Config page, it will be displayed here.
- STUN Server
: Some SIP providers will solve the NAT problem by STUN
server and they will provide the STUN server address to their customers. If
E6501S is used behind a NAT and the STUN information is input in SIP Config
page, the STUN server information will be displayed here.
Registration Status
: It shows E6501S is still “Unregistered” to the SIP provider or it has
properly “Registered” and ready to use.
Phone Number
: It shows the phone number which is assigned to E6501S after
successful registration.
Network – WAN Config
You can enter this page by clicking
NETWORK
and then
WAN Config
at the menu on
the left of the screen. The WAN Config page will display on screen. The current WAN
port IP address, subnet mask, gateway and MAC address are listed on the top of this page
for user’s information. Always remember to click APPLY to save the changes you have
made.