ATS E6501S, Руководство пользователя

Страница: 13 / 47

- Page 13 -
Connecting Your Hardware Together
1. Before you begin, make sure all of the hardware you will be connecting is
powered off.
2. Connect an Ethernet cable from the DSL or Cable modem (which may have an
integrated router) to the WAN port on the back of the E6501S.
3. If you have a PC to connect to the E6501S, connect an Ethernet cable to the LAN
port on the back of the E6501S and the other end of the cable to the LAN port on
your PC’s Ethernet adapter.
4. If you have an existing Router you would like to continue to use, connect one end
of an Ethernet cable to the WAN port on the back of the E6501S and the other
end of the cable to one of the LAN ports on the router.
5. Make sure all devices are properly connected. Connect the power connector from
your 7V switching adapter to the port labeled “7V DC” on the back of the E6501S.
Plug the adapter into a wall outlet.
6. Power on the other devices that you have connected.
Your E6501S is now ready for configuration (Chapter 4), but first you will need to setup
and begin charging the handset.