Atrump A1-3T, Руководство по эксплуатации, Страница: 30 / 37

30
5.3 Survey of the problems:
When problem has occurred, inform the service technician of the following
information. Ask the operator to list details of the information like message code,
problems and etc., such as:
※
s W h a t m a c h i n i n g j o b w h e n t h e p r o b l e m h a p p e n e d ?
※
W h a t e r r o r m e s s a g e s h o w e d o n t h e s c r e e n ?
※
Besides present problem, is there any other situation happened
？
※
Before the breakdown occurs, is there any other unusual motion happened
？
※
Test NC operation mode.
※
In AUTO mode
：
List the program file name, number and content while the
breakdown occurs.
※
Test MANUAL mode and list the operation procedure.
※ List all details of
“Alarm Diagnosis” that showed on the display screen.
Procedures for enter to “Alarm Diagnosis”
(1) Press function key “DIAGN” in to “Alarm diagnosis”
(2) Press “Alarm” from the menu that is in the bottom of screen
Then, it will display all alarm messages.
Do not disassemble machines right away. You should start troubleshooting by checking
and testing operation procedures.
Deal one problem at the time. Be sure to record alarm signal and content and startup
the system again. Please pay attention whether the same breakdown occurs again or
not.
Determine the correct cause while breakdown occurs, Check the information provided
by operator, after the test and inspection if these are not the principal factor to cause
the problem, it is necessary to research the exact cause again
otherwise the same error will occur repeatedly. Absolutely, every breakdown has
its own cause. Even a small simple part is worn-out, that may cause some other
parts broken and lead the system malfunction and stop.