ATON CLT321, Руководство пользователя

Страница: 68 / 100

66
20407785en_ba_b0
Please note
: Before you consider connecting your Aton CLT321 to a PABX, check
whether the PABX accepts tone dialling and FLASH. You can set the length of the flash
under “Settings / BS-Settings / Flash Time”. See page 67.
Setting the function of the end call key
The following settings apply only to ending an active call in “brokering” status on a
network. When operating off a PABX this function should be switched off.
As an alternative to the “normal” process of hanging-up you can end an active call and
be immediately connected with the second call partner. The recall is omitted.
Open [Settings] , select [Base] and press [OK] .
Select
[End Active Call]
and press
[OK]
.
Select [On] or [Off] and press [OK] .
Setting the inquiry call function
Independently of whether the device is being operated off a PABX or directly in connecti-
on with the network provider (standard connection), the inquiry call function must be
adjusted. The inquiry call function is by default set up for the network provider.
Open [Settings] , select [Base] and press [OK] .
Select
[Inquiry]
and press
[OK]
.
Select [Network] or [PABX] and press [OK] .
Setting the Telephone.