AtomoSynth iAbyssal, Руководство пользователя

Страница: 3 / 7

Sets the input from the photocell to alter one of the following controls:
FREQ
: Main oscillator frequency
CUTOFF
: Filter cutoff frequency
PEAK
: Filter resonance/peak
LFO1R
: Main oscillator LFO rate
LFO1D
: Main oscillator LFO depth
LFO2R
: Filter cutoff LFO rate
LFO2D
: Filter cutoff LFO depth
Sets the waveform of the VCO (Voltage Controlled Oscillator) to square or sawtooth wave.
Sets the volume level of the main oscillator.
Sets the base pitch of the main oscillator. Note: Will only work if the photocell switch is in any
other position than
FREQ
.
Sets the amount of white noise applied over the main oscillator.
The iAbyssal features two identical Low frequency oscillators, the only difference is the MOD
switch which sets different modulation targets.
Sets the waveform of the desired LFO to square, inverted sawtooth, or triangle waveform.
Photocell chicken head knob
VCO
switch
LEVEL
knob
FREQ
knob
NOISE
knob
LFO
s (Low Frequency Oscillators)
LFO1, LFO2
switches