AtomoSynth iAbyssal, Руководство пользователя

Страница: 5 / 7

In its ON (upper) position holds the current value of the photocell (frontal camera) allowing you to
use both hands to play with the knobs and switches.
Tap the
DELAY
label in the upper right section of the screen and it will show the AtomoSynth
delay effect pedal. For hiding it simply tap outside the pedal graphic or swipe right.
Sets the frequency of the delay effect.
Sets the FEEDBACK level applied to the delay line. When set to the maximum value, it will
create a feedback loop and start oscillating.
Sets the level of the effect, namely the amount of delayed signal to be mixed with the original
input signal.
Switches the delay effect on or off.
No, these knobs work depending on the position of the switch next to the photocell graphic. In
other words, the
FREQ
knob won't work if the photocell switch is set to
FREQ
, the
CUTOFF
knob won't work if... (and so on).
Delay Effect Pedal
DELAY
label
DELAY
knob
FDBK
knob
LEVEL
knob
ON/OFF
switch
Troubleshooting
The
FREQ
,
CUTOFF
,
PEAK
knobs aren't working. Is my machine broken?
The filter is not filtering the sound (enough). What is wrong?