Try lowering the
LEVEL
knob as the filter responds differently based on the
VCO
input level.
We'd like to hear from you but for this specific scenario there are a couple of things you might
want to try before contacting us:
Make sure you didn't deny the camera access permission for our app. If you did this, the
app certainly won't work. For solving this (or if you're unsure of your selection) go to your
device settings and scroll down until you find the app icon, tap it and enable the camera
access in the screen that will appear next.
Make sure you are in a well lit room and perform the calibration procedure described in this
manual. If you're in a dark (or poorly lit) room, use a light source in your hand or change
your screen brightness.
Make sure the
VOLUME
and
CUTOFF
knobs are in the right place. This sounds silly but
happens way more frequently than you might think.
Try setting the photocell switch to the
FREQ
position and try again.
Keep in mind that this is an emulation of a real analog synthesizer and not all setting
combinations may produce an audible or pleasant sound. This synth is also designed to be
capable of having extreme settings for serving as a real noise machine. We encourage you to try
and experiment with every knob and switch until you get a result you like! Use and abuse the
preset feature for your convenience.
Replaced photocell switch with a chicken head knob control, allowing the photocell input to
be directed to multiple destinations.
Added new factory presets.
Updated Audiobus SDK to 3.0.4.
Fixed delay transition glitch.
Fixed multiple performance issues and improved sound engine.
Moving my hand (or a light) over the camera doesn't seem to do
anything. Should I call tech support?
The app makes very strange / distorted sound(s), it's awful to hear!
Changelog
1.1 - 2018/04/01
Содержание iAbyssal
Страница 7: ...Initial version 1 0 2017 10 18...
