AtomoSynth iAbyssal, Руководство пользователя

Страница: 4 / 7

Sets the oscillation frequency for the desired LFO.
Sets the depth or amount of modulation that the desired LFO will apply.
For
LFO1
, sets the modulation target to:
FREQ
: Main oscillator frequency.
LEVEL
: Volume level of the main oscillator.
NOISE
: White noise volume.
For
LFO2
, sets the modulation target to:
CUTOFF
: Cutoff frequency of the filter.
PEAK
: Filter resonance or peak level.
AMP
: Filtered main osci noise mix.
Sets the filter mode to Low pass (
LP
) or High pass (
HP
).
Sets the filter cutoff frequency. Note: Will only work if the photocell switch is in any other position
than
CUTOFF
.
Sets the resonance level. At high levels adds a distortion effect. Note: Will only work if the
photocell switch is in any other position than
PEAK
.
RATE
knob
DEPTH
knob
MOD
switch
FILTER LP/HP
switch
CUT OFF
knob
PEAK
knob
HOLD
switch