ato form Elefant, Руководство пользователя

Страница: 15 / 24

Page 15/24 (26/21)
Assembly and adjustment
The table is placed on the armrests. Firmly
push down the table bracket lever.
Adjusting the seat width
Slightly loosen the number 9 and 10 knobs
(rear side of the backrest). Set the pelvic
and torso pads to the desired seat width.
Tighten the knobs.
Adjusting the angle of the footplate
Slightly loosen the number 1 and 2 knobs
(on the right and left sides of the chair).
Set the desired angle and tighten the knobs.
Adjusting the length of the footrests
Slightly loosen the tilt-clamping levers
behind the heel cups. Set the desired length
and firmly tighten the tilt-clamping levers.
Adjusting the height of the armrests
and the table
Slightly loosen the number 4 and 5 knobs
(on the right and left sides of the chair).
Set the desired height and tighten the knobs.
Please ensure the height of the armrests
is equal – this is important for mounting
the table!
Caution: do not pinch fingers!
When setting to maximum seat width,
please pull the backrest out from the
guide and only then tighten the knobs.
4 5