ato form Elefant, Руководство пользователя

Страница: 14 / 24

Page 14/24 (26/21)
Assembly and adjustment
Adjusting the seat depth
Slightly loosen the number 6 and 7 knobs
(on the right and left sides of the chair).
Adjust to the desired seat depth by sliding
the backrest forward or back. Tighten the
knobs.
Adjusting the seat height
Fully unscrew the number 3 knobs (on the
right and left sides of the chair).
Two cables are located under the chair
(front and rear): Pulling the cables to the
front causes the locking bolts to retract.
At the same time, move the seat board
up or down one hole. In order to avoid
jamming the seat unit, the seat board must
always be moved alternately, front-to-rear
or rear-to-front, and only moved up or
down one hole at a time.
When the desired seat height is reached,
tighten the number 3 knobs.
Adjusting the active seat position
Slightly loosen the number 3 knobs. Pull
the rear cable under the chair toward
the front, so that the locking bolt retracts,
and move the seat up one hole at the same
time. Tighten the number 3 knobs.
Please always check, before placing the
child in the chair, that all locking bolts
are engaged and the number 3 knobs
are screwed on.
1
6
2
3
7
10 Assembly and adjustment
10.1 Basic model
Preparation:
Unpack the product and remove the pack-
ing materials.
The device is completely assembled.
Ensure that the product is complete and
undamaged.