Installation, Operation & Maintenance Guide
Matterhorn 880/882
4
1-888-MY-AIR11 CAG-06-21-003 AtmosAir.com
01
PRODUCT OVERVIEW
The AtmosAir Matterhorn 880 series, models Matterhorn
880 and 882 ionization generators are commercial and
residential-sized units intended for installation in air
conditioning systems or in custom-designed air distribution
systems in small commercial spaces and typical residential
houses. AtmosAir equipment is effective in reducing odors
and harmful pollutants through the introduction of positive
and negative ions into the air stream to be treated. The
number and size of the ionization tubes used, is dependent
on the airflow, size of the space, and severity of the pollution
and odors. The Matterhorn 880/882 is a 220-250 VAC unit
equipped with one (1) tube. However, it is capable of being
supplied with two (2) tubes. The Matterhorn 882 is always
equipped with two (2) specified tubes. The AtmosAir
Matterhorn 880 series equipment is designed for minimal
maintenance efforts. The 880 series has two components that
require inspection and maintenance:
1.
AtmosAir Matterhorn 880 series base unit components
2.
Ionization tubes
Because there are no moving parts, little maintenance is
required, and the systems have very low failure rates. For
more information, read the AtmosAir Matterhorn 880 series
submittal documents.
Control Panel Diagram
AtmosAir 880/882 Series Control Panel Layout:
Tube
Size
Tube
Number
Flowrate
(CFM)
mm / inch
of WG
Pascals
(Pa)
Steady
State (mA)
M-
8
8
0
C
1
1000
0.0102mm
0.0004”
0.01
34
D
1
1500
0.10156mm
0.0040”
1.00
35
E
1
2000
0.10156mm
0.0040”
1.00
35
F
1
2500
0.3048mm
0.0120”
2.99
37
M
-8
82
C
2
2000
0.2032mm
0.0080”
2.00
34
D
2
3000
0.6121mm
0.0241”
6.00
35
E
2
4000
1.2243mm
0.0482”
12.00
35
F
2
5000
1.7348mm
0.0683”
17.00
37
Pressure Drop calculated at airflow velocity of 1500 f/m (7.62 m/s)
Pressure Drop Chart
A. Power Transformer - Inside
B. Fuse Drawer (+1 Spare Fuse)
C. Power Cord Socket
D. 5-Step Ion Level Adjustment Knob
E. System Power Light
A
D
C
B
E
Overall Mounting Plate Dimensions:
Height and Width: 222.25mm (8 ¾“) x 215.90mm (8 ½”)
