Installation, Operation & Maintenance Guide
Matterhorn 880/882
2
1-888-MY-AIR11 CAG-06-21-003 AtmosAir.com
!IMPORTANT!
READ THIS BEFORE STARTING INSTALLATION.
DO NOT THROW AWAY THIS GUIDE.
How to Contact Us:
If you need help, please contact an
AtmosAir Representative for technical assistance.
For safe installation you
MUST:
■
Always disconnect power to the unit before handling any of the
components.
■
DO NOT connect to the power before the installation is complete and
personnel are aware of the imminent operation. Secondary voltage to the
ionization tube can be as high as 3000 Volts AC.
■
Carefully read this instruction booklet before beginning the installation.
■
Follow each installation or repair step exactly as shown and explained in
this guide.
■
Observe all local, state, national and international electrical codes.
■
Pay close attention to all warnings and caution notices given in this guide.
!CAUTION!
Do not touch while in operation shut off electricity before servicing!
This equipment should be inspected frequently and collected dirt removed from it regularly to prevent excessive
accumulation that may result in flashover or risk of fire.
!MISE EN GARDE!
Ne touchez pas pendant le fonctionnement couper l’électricité avant l’entretien
Cet équipement doit être inspecté fréquemment et la saleté collectée doit être retirée régulièrement pour éviter
toute accumulation excessive pouvant entraîner un contournement ou un risque d’incendie.
