Installation, Operation & Maintenance Guide
AtmosSmart
11
1-888-MY-AIR11 CAG-06-21-003 AtmosAir.com
04
MONITORING DISPLAY INSTALLATION
AtmosSmart™ IAQ Data HDMI to Monitor Display Option
: A 4” × 7” (10 cm ×
18 cm) optional remote display is supported (but not supplied). The Raspberry
Pi 4 can be mounted in close proximity to the AtmosSmart™ sensor array at the
bottom of the duct. A mounting bracket is optional. The display shows real-time
data and is read-only. It may be folded up out of the way. A HDMI port is also
provided in the Sensor Body. A large remote monitor can also be powered from
this HDMI receptacle. While there is no length dimension on this HDMI cable,
33’ (10 meters) is recommended. For longer cable routing, a HDMI repeater is
required. Below are the 8 data points that the AtmosSmart system records, that
can be displayed via an optional Monitor:
05
ATMOSSMART CONNECTION POINT
BACNET / NETWORK END
BPI END
