Atmos Cam 21, Руководство по эксплуатации

Страница: 7 / 40

7 Hints for your safety
2.0 Hints for your safety
The safety of the ATMOS
@
Cam 21 / 31 complies with all the recognized rules of
technology and the guidelines of the Medical Products Law.
Read and follow the safety instructions carefully before using the product.
General safety information
The ATMOS® Cam 21 / 31 is:
• designed in line with IEC 60601-1 / EN 60601-1.
• assigned to VDE safety class I
• assigned to class I of the German law on medical products.
The ATMOS® Cam 21 / 31 fully complies with the electromagnetic immunity
requirements of standard IEC 60601-1-2 / EN 60601-1-2 "Electromagnetic compatibility
– Medical Electrical Equipment".
Pay also attention to the safety information of the attached devices / parts.
ATMOS is not liable for personal injury and damage to property if
• no original ATMOS parts are being used,
• the advice for use in these operating instructions is not being observed,
• assembly, new settings, alterations, extensions and repairs have been carried out by
personnel not authorised by ATMOS.
Please check the delivery on completeness and intactness.
The ATMOS® Cam 21 / 31 may be used in supervised operation by qualified personnel
only which has been authorised by ATMOS and which has been trained for operating
the appliance (IEC 60601-1/EN 60601-1).
Pay also attention to the safety information of the attached devices / parts as well as to
the safety informations in the following chapters.
For the camera head only extension cables with maximum 2 m length may be used.
In case of an insufficient illumination the examination has to be cancelled respectively a
brighter light source has to be used.
The warranty will be rendered invalid in case of damages caused due to the utilization
of accessories or consumables which are not approved by ATMOS for use with this unit.
Clean and disinfect the camera in regular intervalls (peruse chapter 5.0).
Dangers for users, patients and third parties
Protect yourself against an electric shock!
• T o disconnect the device from the mains supply, first remove the plug from the wall
outlet. Disconnect the connection line on the device afterwards only.
• Prior to cleaning, switch off the device and separate it from the mains supply resp.
from other devices.
• Never touch the device’s interfaces and the patient at the same time!
• Do not touch the cables or plugs wit wet hands!
• Check the device and connection lines for defects prior to the use of the device.
• Damaged cables must be replaced!
Danger of explosion!
• The ATMOS® Cam 21 / 31 is not designed for the use in medical areas with an
explosion hazard or which are oxygenated. Explosion-hazardous areas may be
caused by the use of flammable anaesthetics, skin cleansing products and skin
disinfectants.