Atmos Cam 21, Руководство по эксплуатации

Страница: 4 / 40

4 Introduction
1.0 Introduction
Information on the device versions
Compared to the ATMOS® Cam 21, the ATMOS® Cam 31 has an additional image
memory. The DV versions also have a USB-connection to conduct the video signal to the
PC.
ATMOS ® Cam 31 Cam 21 DV Cam 31 DV Cam 31 DV Data
Image memory:

-
 
Outputs:
FBAS
   
S-Video
   
HDMI
   
Digital Video Streaming:
USB -
  
Display of symbols
- - -

SD card -
  
Audio in / out -
  
1.1 Notes on operating instructions
In the following all device versions, as well as all modules and table-top devices are
named ATMOS® Cam 21/31.
These operating instructions contain important notes on how to operate
the ATMOS
®
Cam 21 / 31 safely, correctly and effectively.
Their reading
helps to avoid risks, and also to reduce repair costs and down-times. This
increases, amongst other things, the reliability and service-life of the device.
These operating instructions serve not only for new operating personnel to be
instructed in its use, but also for use as a reference manual. Reprints (also in
extracts) only with permission in written form by ATMOS.
These operating instructions must always be kept available near the
device.
Care and period tests in conjunction with professional execution provide
for operational safety and readiness for use of your ATMOS
®
Cam 21 / 31
and are therefore a must besides regular cleaning.
Repair work and period tests may only be carried out by expert personnel
authorised by ATMOS. By applying only original spare parts you will have the
guarantee that operational safety, readiness for work and the value of your
ATMOS® Cam 21 / 31 will be preserved.
The product ATMOS
®
Cam 21 / 31 bears CE marking CE according to the
EC Directive of the council for medical products 93/42/EEC and meets the
basic requirements of Appendix I of the directive.
The product ATMOS
®
Cam 21 / 31 complies with all applicable
requirements of the directive 2011/65/EC restricting the use of certain
hazardous substances in electrical and electronic equipment (“RoHS”).
The declaration of conformity and our general standard terms and conditions
can be obtained on our website at www.atmosmed.com.
The quality management system applied at ATMOS has been certified
according to
international
standards EN ISO 13485.
Prior to start-up please peruse chapter 2.0 „For your safety“, in order to be
prepared for any possible dangerous situations.