63
SAMA5D3 Xplained [USER GUIDE]
Atmel-11269D-ATARM-SAMA5D3-Xplained-XPLD-User Guide_07-Sep-15
5.
Unsolder C13 and re-solder it across the cut made in Step 3, directly to L7.
6.
Solder a wire between the top pad of L7 and pin 1 of JP1.
7.
To complete the procedure, either:
a) install a jumper across both JP1 pins for normal operation,
or
b) remove the jumper and connect an ammeter across both JP1 pins to measure VDDCORE current.
C13 Removed
C13 Re-soldered
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from