61
SAMA5D3 Xplained [USER GUIDE]
Atmel-11269D-ATARM-SAMA5D3-Xplained-XPLD-User Guide_07-Sep-15
5.2
JP1 routing is incorrect and results in inaccurate VDDCORE current measurement
The jumper JP1 was incorrectly routed on the SAMA5D3 Xplained board. As a result, the on-board connections on
the left and right sides of the jumper do not match the schematics and VDDCORE current measurement is
incorrect.
Workaround:
1.
Locate C13, L7 and JP1 on the SAMA5D3 Xplained board.
2.
On the top side, cut the track between pins 1 and 2 of JP1.
C13, L7 and JP1 located on the bottom side
JP1 located on the top side
Before
After
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from