Atmel AT32UC3L QMatrix, Примечание к применению

Страница: 6 / 36

6
Atmel AVR8015
32185A-AVR-01/12
•
Touch Data LED green: Touch Debug mode (default mode after power-up)
•
Touch Data LED off: Programmer mode
Launch the AVR Programming tool on Atmel AVR Studio 5 and program the device.
Use AVR Studio 5.0 or later.
Programming output file using AVR Studio 5.
.Hex
file or
.Elf
file can be loaded into the target board by following the below steps.
1. In studio5 IDE, select and click on Tools → AVR Programming option as shown in
Figure 4-1 .
2. Switch the device to Programmer mode as described in Section 4.1.1 .
Figure 4-1. Selecting AVR programmer.
3. Set the target hardware under tools drop down menu, proper device under device
icon and interface type under interface icon, and click on apply button as shown
in
Figure 4-2 .