manualshive.com logo in svg

Atlas SunCool CPS+, Руководство по эксплуатации

Поделиться
Скачать
Atlas SunCool CPS+ Скачать руководство пользователя страница 9

- 9 -

Operating Manual SunCool for SUNTEST

®

 CPS+

1

Instructions for safe operation

1.2  General safety instructions

Main power supply connection:

The SunCool refrigeration device can be operated from a power supply of:
•  230 V ± 10%, 50 / 60 Hz

The instrument is prepared for the main power supply according to the order on delivery.

 

Disposal: 

 

OBSERVE THE REGULATIONS FOR DISPOSAL! 

 

The manufacturers‘ obligations to take back the equipment in accordance with the respective  

 

national version of the EC directive 2012/19/EU apply since March 24, 2006.

RohS conformity: 

The SunCool meets the requirements of the 2011/65/EU RohS directive (restriction of the use of certain hazardous 
substances in electrical and electronic equipment) for equipment group 9.

This directive does not apply for equipment which was designed exclusively for research and development purposes 
and is only provided at intra-company level.

Therefore, the SUNTEST CPS+ instrument does not come under the validity of the above mentioned directive.

Disposal of the packaging:

Please dispose of the packaging materials according to the valid disposal regulations. A list of used packaging  
materials can be found in chapter 2, par. 2.1 “Packaging.”

 

CAUTION – special waste

The device is operated with the R410A coolant. This coolant may not be poured down the drain or filled into 
containers and thrown in with domestic waste. The coolant must be disposed of by a company specializing 
in coolants! 

Содержание SunCool CPS+





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды