manualshive.com logo in svg

Atlas SunCool CPS+, Руководство по эксплуатации

Поделиться
Скачать
Atlas SunCool CPS+ Скачать руководство пользователя страница 7

- 7 -

Operating Manual SunCool for SUNTEST

®

 CPS+

1

Instructions for safe operation

Symbols in the operating manual:

   

 

WARNING!

Disregarding this information can result in serious injury or death. 

  

CAUTION!

Disregarding this information can result in slight to severe injury and 
property damage.

 

NOTE! 

Provides application tips and useful information.

 
 

Warns against hazardous solvents.

 

Warns against hot surfaces / burn hazards

 
 

Warns against electrical shock

 

Warns against toxic materials.

Symbols on the instrument:

 
 

WARNING AGAINST A DANGEROUS PLACE! 

Caution! See the operating manual.

 

CE conformity mark 

 

REFERENCE TO DISPOSAL DIRECTIVE (WEEE)! 

 

The disposal of this product must comply with the  

 

EC directive 2012/19/EU (updated version) with regard 

 

to the used electrical and electronic equipment (WEEE).

1.1  Explanation of the symbols

Содержание SunCool CPS+





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды