Product Description
11
PVL14OF-EXT
Product Description
The lift is suitable for lifting motor vehicles having maximum weight as described
in the nameplate on the power side column of the lift. All mechanical parts have
been built in steel plate to make the frame stiff and strong while keeping a low
weight. The electro hydraulic operation is described in detail in chapter 8.
This chapter describes the lift’s principal elements, allowing the user to be
familiar with the machine. As shown in fi gure 2, the lift is composed of four
columns: N.2 front columns (1), N.2 rear columns (2), two platforms: the
power-side platform (3) with the hydraulic cylinder included and the off-
side platform (4), and two beams: the front beam (5) and the rear bean (6),
anchored to the ground by means of the column base plates. Raising motion
is carried out by pushing the lifting button on the power unit (7) to operate
a power unit delivering the hydraulic fl uid to cylinders to act on cable lifting
system. Lowering motion is controlled by pushing the lowering lever on the
power unit and carried out under the weight of the load lifted. The automatic
mechanical back-up safety (8) holds on the lift in the elevated position, can be
released by pushing the lever of the control valve (9). The slack cable safety
(10) can hold on the lift in event of cable slackening and/or failure.
Figure 2 – Lift
