Atlas IED Atmosphere AZM4 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 70

background image

Atmosphere

User Manual

AtlasIED.com

TELEPHONE: (800) 876-3333

[email protected]

1601 JACK MCKAY BLVD.

ENNIS, TEXAS 75119 U.S.A.

– 13 –

Method-3 - Access Point Connection (Built-in WiFi creates a local wireless network for connection)

•

From the front panel menu enable Access Point Mode (Network>WiFi>Change Mode>Access Pt, then confirm change).

•

The unit will now broadcast an SSID (AtlasIED_AZM will be the default SSID) that can be found using WiFi enabled devices.

•

Select the now available network from the settings page on your device and connect. (The default password is AtlasIED.
This can be changed in the user interface).

•

Using a web browser on the device, navigate to the IP address that appears on the AZM front panel screen using the address
bar located in the web browser.

Software Overview (in order of toolbar, left to right)

Dashboard

The Dashboard is the user page to monitor the AZM system wide activity. It provides quick links to interrogate and fix settings.

Features

1. The Dashboard is the first tool on the UI navigation toolbar. Select to open. To the far right, there is a User link to settings page, and an option

for Full Screen view, if desired. The background has a dark or light Theme setting that can be selected when logging in or otherwise selected
in settings under the Theme page.

2. This area displays the project and user’s name that is entered under the settings toolbar on the Project Settings page to the left. On the right,

the Time & Date is also set up under the settings toolbar on the Clock Settings page.

3. Inputs Assigned - displays a visual graphic and number of inputs routed to a zone, along with a quick link to input settings. In addition, an input

gets counted as consumed if it has been given a name or is part of a scene.

4. Zones Assigned - displays a visual and number of zone outputs set up, along with a quick link to Outputs settings.

5. Thermal Sensor – this is the output of the three monitored heat sensors: PSU (power supply unit), Micro (microprocessor), and Analog I/O.

The read-out can be viewed in minutes, hours, and days.

6. An internal fan will turn on automatically if necessary and speed is displayed as a visual graphic and corresponding percent. Fan speed is

dynamically regulated by monitoring temperature. The airflow direction is front to rear.

«
...
11
12
13
14
15
...
»

Содержание Atmosphere AZM4







































































Отзывы:

Нет отзывов

Похожие инструкции для Atmosphere AZM4

Бренд: Gantner Страницы: 56

Бренд: DayTronic Страницы: 22

Бренд: DayTronic Страницы: 414

Бренд: Hanna Instruments Страницы: 88

Black Force Wireless

Бренд: Hama Страницы: 10

Бренд: Jabra Страницы: 3

Бренд: Magellan Страницы: 2

FUTERA XLF Series

Бренд: RBI Страницы: 128

Бренд: RBH Access Technologies Страницы: 36

Бренд: S&C Страницы: 11

Бренд: S&C Страницы: 24

Бренд: S&C Страницы: 19

Бренд: Vanderbilt Страницы: 2

Бренд: Watts Страницы: 8

Бренд: YASKAWA Страницы: 121

Бренд: YASKAWA Страницы: 17

Бренд: YASKAWA Страницы: 58

Бренд: YASKAWA Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды