Atlas Equipment TC589X, Руководство пользователя

Страница: 26 / 44

26
TUBE TIRES
STEP 1:
Remove the valve core from the inside of the valve stem.
STEP 2:
Clip the inflator hose air chuck to the tire valve. Make sure it is properly connected.
STEP 3:
Check that the tire size and the rim diameter correspond.
STEP 4:
Lubricate the tire and rim beads thoroughly.
STEP 5:
Press the tire inflator pedal down to the middle position to start inflation of tube.
CAUTION: Do NOT use the BEAD BLASTER.
STEP 6:
Press and release (frequently) the inflating pedal (middle position only). Check the
tire’s air pressure each time the pedal is released. Make sure the inner tube is not
pinched between the rim and tire. Continue to inflate cautiously until the correct air
pressure is achieved. Install the valve core into the valve stem.
TUBELESS TIRES
STEP 1:
Remove the valve core from the inside of the valve stem.
STEP 2:
Clip the inflator hose air chuck to the tire valve. Make sure it is properly connected.
STEP 3:
Check the size of the wheel and the size of the tire. They MUST be the same.
STEP 4:
Lubricate the tire and rim beads thoroughly.
STEP 5:
Press the tire inflator pedal down to the middle position.
STEP 6:
If the tire beads do NOT seat properly; you may use the BEAD BLASTER
INFLATOR SYSTEM by depressing the pedal fully. A strong jet of air will be
released through the air holes located behind the turntable jaws to help seat the bead
of the tire. You may need to attempt the bead seating process several times before the
beads will seat. Allow the air tank (at the back of the tire changer) to fill completely
with air before a new bead seating attempt is made.
STEP 7:
Continue to keep the pedal pressed to the middle position to allow regulated air to
flow through the inflation hose and inflate the tire, releasing frequently to check the
inflation pressure.
CAUTION:
Always keep hands and body away from the tire when inflating
.
Continue to inflate the tire to the manufacturer’s recommended air pressure.
Never exceed the tire manufacturer’s recommended air pressure.
Check the air pressure with a digital air gauge.
NOTES:
Failure to follow all warnings and instructions may lead to serious personal injury or death to the
operator or any bystanders.
ƒ
NEVER
exceed 50 psi (3.5 bar) air pressure when inflating a tire mounted on the tire
changer.
If more than 50 PSI air pressure is required, remove the wheel from the tire changer
and continue the inflation procedure with the wheel/tire assembly inside a special
protection cage.
ƒ
NEVER
exceed the maximum inflation pressure given by the tire manufacturer.
ƒ
ALWAYS
keep hands and body away from tire when inflating.
ƒ
ONLY
allow fully trained personnel to use the tire changer. Do not allow unqualified
persons to operate or be close to the tire changer (when in operation).