Atlas Copco XRHS 1150 CD4 C3 WUX, Инструкция по эксплуатации

Страница: 63 / 106

- 63 -
Notes
Maintenance schedule (hrs)
(continuation of page 62)
Daily 50 hrs
after initial
start-up
Every
250 hrs
Every
500 hrs
Every
750 hrs
Every
1000 hrs
Every
2000 hrs
Yearly
Clean fuel cooler x x x
Clean crankcase breather filter and check for obstructions x x x
Replace air filter element (1) x x x
Check external fuel connection (option) x x x
Inspection by Atlas Copco service technician x x x
Inspect alternator x x
Check/Replace safety cartridge x
(to be continued on page 64)
1. More frequently when operating in a dusty environment.
2. Refer to engine operaton manual.
3. After a day’s work.
4. Yearly is only valid when using PARCOOL. Change coolant every 5 years.
5. Use Atlas Copco oil filters, with by-pass valve as specified in the parts list.
6. Gummed or clogged filters means fuel starvation and reduced engine performance.
7. See section
Oil specifications .
8. The following part numbers can be ordered from Atlas Copco to check on inhibitors and freezing
points:

2913 0028 00 : refractometer

2913 0029 00 : pH meter.
9. See section Safety valve .
10. See section Before starting .
11. Replace all rubber flexibles every 6 years.
For other specific engine and alternator requirements refer to specific manuals.
12. 250 hours is only valid when using PAROIL E or PAROIL E xtra.
Keep the bolts of the housing, the lifting
beam, tow bar and axles securely
tightened. For torque values see section
Technical specifications.