Atlas Copco QAS 500 Volvo S2A APP, Инструкция по эксплуатации

Страница: 31 / 114

- 31 -
Phase voltages mains display
This view shows the phase voltages of the mains (is
only shown in AMF mode).
Line voltages mains display
This view shows the line voltages of the mains (is
only shown in AMF mode).
Phase voltages generator display
This view shows the phase voltages of the generator.
Qc2002™ Menu Description
Status Display (pop-up window)
In case special statuses are entered, a pop-up window
will automatically be entered for as long as the status
is active.
The background screen is not updated when the status
pop-up window is active.
These special statuses are:
If a special status has elapsed, the active view will be
entered again automatically.
If an Alarm comes up, the Alarm Display is shown.
Parameter list
The Parameter Menu's are pre-programmed !
A password will be asked for when an attempt to
change a setting is about to be done (user password =
2003).
By entering the parameter list, pushbutton
AUTOMATIC is disposed of its normal operations
and will not perform any functionality.
It's possible to scroll between configuration menu's
by using the pushbuttons UP and DOWN.
Pushing the ENTER button activates the
configuration menu which is shown at the display.
M L1-N
M L2-N
M L3-N 230V
230V
230V
M L1-L2
M L2-L3
M L3-L1 400V
400V
400V
G L1-N
G L2-N
G L3-N 230V
230V
230V
START OFF/
EXTENDED
STOP TIMER
COOLDOWN
DIAGNOSTIC