Atlas Copco QAS 14, Инструкция по эксплуатации

Страница: 65 / 100

- 65 -
Starting the generator and switching
the lights on and off
1. To switch the lamps (HP) on, plug the connector
of the power supply cable towards the lamps
(PSC) in outlet socket X3 of the generator.
2. Check that the main circuit breaker Q3 is switched
off.
3. Start up the generator (see “Operating Qc1002™”
or “Operating Qc2002™”).
4. To switch on the lights, switch on the main circuit
breaker Q3. To switch off the lights, switch off the
main ciruit breaker Q3.
Taking down the lighting tower
1. Check that the mast (M) is turned to the original
position (with the lights directed to the back of the
lighting tower) and locked.
2. To take down the lighting tower follow the
procedure of the erection of the lighting tower in
reversed order.
Additional checks:
– After locking the mast in its horizontal position,
tighten the elevation cable (EC) by turning on the
lever of the winding mechanisme (WM).
– Make sure ALWAYS to retract the stabilizers
(ST).
– After retracting, check that the stabilizers (ST) are
locked
with the appropriate handles (HLS)
.
Check that the foots of the stabilizers (FS) are
tightened firmly (using the handles HHF and
HLF).
Lighting tower maintenance
– Refer to the maintenance instructions mentioned
in the chapter dealing with the “Undercarriage”
option.
– Check the condition of the tower, the tightness of
its bolts and the fixation of the elevation cable
(EC) at least twice a year.
Only start the generator and switch
on the lights when the lighting tower
is erected to the desired position.
When pushing on the emergency
stop the main circuit breaker Q3 is
automatically switched off.
!
!
Do not take down the lighting tower
with ligths switched on and
generator running. !
Do not use the handles on the
lighting tower for towing or lifting
the generator. !