Atlas Copco QAS 14, Инструкция по эксплуатации

Страница: 42 / 100

- 42 -
Check engine mounts x x
Check crankcase ventilation system x x
Check condition of cooling fan assembly x x
Pressure test cooling system x x
Check engine electrical ground connection x x
Replace air filter element (2) x x
Measure alternator insulation resistance x x
Check glycol level in coolant (4) x x
Check PH level of engine coolant (4) x x
Monitor Insulation Resistance of the main alternator x x
Replace safety cartridge x
Check alternator and starter motor x
Check electrical system for security of cables and wear x
Test thermostats x
Test glow plugs x
Inspection by Atlas Copco Service technician
Generators in standby application have to be tested on a
regular basis. At least once a month the engine should run
for minimum 30 minutes at a high load (50% - 70%) that
the engine reaches its operating temperature.
!