Atlas Copco PN 6000 S, Инструкции по ремонту

Страница: 6 / 13

5
PAGE
Repair Instructions No.178.06/97
PN 6000 S
Dismantling the
spindle
1
Press the spindle sleeve (7) with the
spindle gear (G) from the bearing end
plate (A).
2
Lever off the seal ring (8).
3
Remove the locking ring (9) with aid of
special pliers.
4
Remove the needle bearing (B), the disks
(C and E), the cup springs (D) as well as
the needle bearing (F) from the bearing
end plate (A).
5
Remove the four pins (H) with aid of a
magnet.
6
Remove the spindle sleeve (7) with the
O-ring (6) from the spindle gear (G).
7
Remove the O-ring (N), the snap die (M),
the disk (L), the O-ring (K) and the disk (J)
from the spindle gear (G).
8
Loosen the two screws (1) and remove the
cylinder (4) with the percussion body (2)
and the O-ring (3) from the crankcase (5).
D
1
6
5
4
3
2
7
8
9
A
B
C
E
G
H
F
J
K
L
M
N
9