Repair instruction No. 171.5/94
PB 14 D, PB 14 C
9
PAGE
9
Seite
1
Pull the spring (2) upwards with a hook
and insert the carbon brushes (3). Take
care that the carbon brushes face the
spring with the bevelled side upwards.
2
Secure the cable lug of the carbon
brushes with the screw (4).
3
Fit and secure both brush covers (1).
1
Fit the barrel (2) such that its opening (5)
faces the reception of the inclined shaft
bearing assembly.
2
Press the barrel in with aid of a service
tool.
3
Insert the barrel retainer (3), fit and secure
it with three screws (4).
1
Break the edges of the striker bearing clips
(2) before fitting them to the striker (1).
2
Fit the nu–lip–seal (3) and make sure that
it is not twisted.
3
Insert the striker into the barrel (4).
1
Fit the nu–lip–seal (2) to the piston (4) and
make sure that it is not twisted.
2
Insert the gudgeon pin (3) and fit the
bearing clip (5).
3
Grease the piston and insert it into the
barrel.
Fitting the
carbon brushes
Mounting the
barrel
Fitting the striker
Fitting the piston
2
3
4
1
3
2
1
4
5
3
2
1
4
5
1
2 3 4
Содержание PB 14 C
Страница 1: ......
