Atlas Copco PB 14 C, Быстрый старт

Страница: 8 / 11

Repair instruction No. 171.5/94
PB 14 D, PB 14 C
8
PAGE
8 Seite
1
Insert the connection lead into the lower
opening of the rear handle front (7) and
lock the switch (6) by depressing the
locking button and the pusher at the same
time.
2
Now insert the switch such that the pusher
and the locking button fit through the
corresponding reliefs.
3
Unlock the locking button by depressing
the pusher.
4
Fit and secure the rear handle grip (5).
Make sure the leads are not jammed.
5
Fit the support rubbers (2) and place the
handle support (3) over it. Take care that
the leads are in the right position.
6
Now replace the fitted rear handle
assembly to the motor housing until
locked.
7
Insert the two handle locking plates (4) until they engage, then secure them with screws.
1
Connect the cables to the terminal block
(2) as shown in illustration.
2
Push the brush leads (1) into the housing
towards the carbon brushes and connect
them.
3
Fit the terminal bracket (3) to the housing
and secure it with the screws (4).
Assembling the
rear handle
assembly
Mounting the
switch terminals
2 1
5
7
6
3
4
4
3
4
1
2
3