Atlas Copco MAS 200, Инструкция

Страница: 35 / 94

Topic Description
Pressure band used
Selection of 1st or 2nd pressure band. A pressure band is a combination of a
loading pressure, a setpoint and an unloading pressure
Digital pressure band
selection Allows a remote signal to control the pressure band selection.
Reduced unload
pressure
The unload pressure is reduced
Reduced load pressure The load pressure is reduced
INPUTS
Topic Description
General Displays a number of general readouts and bipolar states
Element(s) Displays a list of readouts related to the compressor stages
Filter(s) Displays the status of the filter
Main Motor Displays a number of readouts and bipolar states concerning the main motor
Network Displays a number of bipolar states of remote signals
Oil Circuit Displays a number of readouts and bipolar states concerning the oil circuit
OUTPUTS
Topic Description
General Displays a number of analogue and digital outputs
Main Motor Displays a number of digital outputs concerning the main motor status
SPM (Shock Pulse Method)
Topic Description
Motor, drive end Displays the vibration level at the drive end of the motor
Motor, non-drive end Displays the vibration level at the non-drive end of the motor
Low pressure stage,
drive end Displays the vibration level at the drive end of the low pressure compressor
stage (when option is chosen)
Low pressure stage, non-
drive end Displays the vibration level at the non-drive end of the low pressure compressor
stage (when option is chosen)
Gearbox Displays the vibration level at the gearbox
EVENT HISTORY
Topic Description
-
Displays a log file of all shutdowns and shows the status of the type, counters,
inputs and outputs at the moment a shutdown appeared
SETTINGS
Topic Description
Network Displays the CAN and ethernet configuration
Regulation Displays settings concerning the compressed air flow regulation
Instruction book
APF219617 33