2
PAGE
Repair Instructions No.521.09/00
BBS(E)1100
Removing the
field and the
armature
1
Pull out the armature (2) and remove the
air deflector ring (5).
2
Press off two ball bearings (1) and (4) from
the armature (2) with aid of the forcing
discs (service tool).
3
Remove the seal ring (3).
4
Loosen both field screws (A) and remove
the spring washers (B). Branch off the
field (6) and remove it.
5
The switch (8) and the capacitor (9) can
now be removed from the housing shell.
Only applicable for BBSE 1100:
Remove the electronic element with
torque setting wheel (7) from the housing
shell.
6
Loosen both screws (D) and remove the
carbon brush holders (C) on both sides.
Detaching the
spring steel
sheet
1
Loosen two screws (1).
2
Remove the spring steel sheet (3) and the
support for the sand belt (4).
3
Unscrew the four screws (2) through the
openings in the absolute unit.
4
Remove the absolute unit (5) from the mo-
tor housing.
2
3
4
5
6
7
8
9
C
A
B
1
D
3
2
1
3 4
5
4
