6
PAGE
Repair Instructions No.521.09/00
BBS(E)1100
Assembly
Assembling the
steering roller
1
Mount the guide (3).
2
Press the bearing sleeves (5) and (7) into
the steering roller (6).
3
Insert the steering roller (6) with the wash-
ers (4) and (8) into the steering roller sup-
port (9).
4
Insert the steering roller axis (1).
5
Pre-mount the spring (2).
Mounting the
T-screw
1
Insert the cover (9) and fasten it with two
screws (8).
2
Mount the spring (A) on the steering roller
support.
3
Insert the T-screw (1) with the spring (2),
the backing flange (3), and the sealing
washer (4) into the absolute unit.
4
Insert the completely assembled steering
roller (E) into the absolute unit, and insert
the sealing washer (6).
Push back the steering roller (e.g. on the
edge of a table) and secure the
T-screw (1) with the nut (7), using a socket
spanner (SW7).
Insert the ring (5).
5
Insert the distance sleeve (B) and the ten-
sion lever (C) and secure them with the
screw (D).
Mounting the
pinion
1
Mount the bearing sleeves (1) and (2) in
the absolute unit.
2
Press the ball bearing (5) onto the pin-
ion (4) and mount the sleeve (3).
3
Insert the completely assembled pin-
ion (4) into the absolute unit. If necessary,
press it in.
1
4
6
7 8
5
2
3
9
1
7
6
5
4
1
2
3
8
9
D
C
B
A
E
2
1
2
3
5
4
3
