LZB46-RL-A065-11 ATEX
Safety Information
© Atlas Copco Industrial Technique AB - 9834 2006 00
7
Usage
• Make sure the product is earthed to the equipotential
bonding system of the workshop, for example through
accessories such as hoses and air-pressure connections.
• It is the responsibility of the user to make sure that the
product and all possible accessories, such as wrenches
and air connections, conform to the national safety regu-
lations for equipment used in potentially explosive areas.
ATEX Code Definition
The ATEX code is:
Ex II 2GD h T4 IIC T110°C
°C ≤ Ta ≤ 40 °C
Description
Value
Definition
Equipment group
II
Surface Industry
Equipment category
Group II
2
High level of pro-
tection
• zone 1 (gas)
• zone 2 (gas)
• zone 21 (dust)
• zone 22 (dust)
Atmosphere
G
Atmosphere con-
taining Gas, Va-
pors or Mist
D
Atmosphere con-
taining Dust
Safety design
h
Mechanical prod-
uct
Gas group
IIC
Hydrogene/ Acety-
lene
IIB
Ethylene
Max surface tem-
perature in
Gas
at-
mosphere
T1
= 450°C
T2
= 300°C
T3
= 200°C
T4
= 135°C
T5
= 100°C
T6
= 85°C
Max surface tem-
perature in
Dust
at-
mosphere
Example tempera-
tures:
T85°C
T110°C
T120°C
T125°C
T240°C
Special restriction,
for example ambi-
ent temperature
range.
X
Useful information
Website
Log in to Atlas Copco:
You can find information concerning our products, acces-
sories, spare parts and published matters on our website.
Country of origin
Please refer to the information on the product label.
Warranty
• Product warranty will expire 12 months after the product
is first taken into use, but will in any case expire at the
latest 13 months after delivery.
• Normal wear and tear on parts is not included within the
warranty.
• Normal wear and tear is that which requires a part
change or other adjustment/overhaul during standard
tools maintenance typical for that period (expressed
in time, operation hours or otherwise).
• The product warranty relies on the correct use, mainte-
nance, and repair of the tool and its component parts.
• Damage to parts that occurs as a result of inadequate
maintenance or performed by parties other than Atlas
Copco or their Certified Service Partners during the war-
ranty period is not covered by the warranty.
• To avoid damage or destruction of tool parts, service the
tool according to the recommended maintenance sched-
ules and follow the correct instructions.
• Warranty repairs are only performed in Atlas Copco
workshops or by Certified Service Partners.
Atlas Copco offers extended warranty and state of the art
preventive maintenance through its ToolCover contracts. For
further information contact your local Service representative.
For electrical motors:
• Warranty will only apply when the electric motor has not
been opened.
ServAid
ServAid is a portal that contains technical information for all
hardware and software products, such as:
- Regulatory and Safety information
- Technical data
- Installation, Operation and Service instructions
- Spare parts lists
- Accessories
ServAid is continuously updated and is available at:
For further information contact your local Atlas Copco repre-
sentative.