![background image](http://html1.mh-extra.com/html/atlantis/splash-tech-r60/splash-tech-r60_service-manual_3000615035.webp)
With the regulator pressurized, insert the transmitter/piston (32) into the body assembly.
Install the new clear cold water diaphragm (33) into the recess in the diaphragm clamp (31)
over the transmitter piston and Atlantis decal.
Install env cap (34) onto the diaphragm clamp (19). Use a clean rag to help grasp the end
cap. Tighten the env cap firmly. Use enough force so that the end cap cannot be loosened
easily by hand. Use the Pin Spanner to tighten the end cap. Use a soft material as a cushion
under the spanner to prevent marks from being made on the end cap.