![background image](http://html1.mh-extra.com/html/atlantis/splash-tech-r60/splash-tech-r60_service-manual_3000615024.webp)
PRELIMINARY ASSEMBLY OF THE FIRST STAGE
Correct order of assembly is extremely important! The diaphragm end MUST be assembled
before the turret bolt end. Incorrect assembly order will result in damage to the first stage
lifter (9) and hp seat (16). If the diaphragm end of the regulator is opened for any reason,
such as replacing the hp seat (16), the other end of the regulator (BALANCE PLUG) MUST BE
DISASSEMBLED so that the diaphragm end can be re-assembled first.
To determine the identity of each
O-ring in the Service Kit, remove
them from the bag and use the O-ring
Identification Chart on the front page
of this manual. Lay each O-ring over its
corresponding picture on the page and
read the description. Before installing
new O-rings into the regulator, lightly
lubricate the O-rings with LTI Christo
- Lube MCG129 ® (for enriched air
regulators), or Dow-Corning 111®
silicone grease. The most effective
way to lubricate the kit O-rings is to
put them in a small plastic bag with a
pea sized amount of grease. Rub the
O-rings and grease together in the bag
until all the O-rings are coated evenly.
Try not to wipe the lubrication off the
O-rings when assembling them onto
other parts.