3
SAFETY INSTRUCTIONS
CAUTION
It is the user’s responsibility to determine and validate the suitability of this equipment for use in the user’s system or process. No warranty or representation
is made by the manufacturer with respect to suitability or performance of this equipment or to the results that may be expected from its use. The user should
periodically inspect, clean as necessary and confirm the presence and good legibility of the product safety labels. Contact the factory for replacement labels in the
event that any of the labels are missing or illegible.
To guard against injury, basic safety precautions should be observed, including the following:
1. Read and follow
ALL
safety instructions.
Avoid exposure to direct or reflected germicidal ultraviolet rays. Germicidal ultraviolet
rays are harmful to the eyes and skin.
2. Intended for indoor use only.
3. Do not alter design or construction.
4.
Do not use this fixture for other than its intended purpose, as described in this manual.
5.
Do not override safety interlock.
6.
Do not store/operate under any source of moisture or condensation, such as humidifiers, cooling coils, etc.
7. Do not remove any labels or devices.
8.
Do not operate without proper electrical ground.
9. Do not operate the unit if there is visible or suspected damage to the unit or, if applicable, there is damage
to power cord and/or plug.
10. Keep inlet and outlet of the blowers clean and clear of debris.
11.
Do not operate without access doors closed and locked.
12.
Do not operate without all 4 filters installed behind the intake grills.
13. Stay clear of blowers or other moving parts that can cause injuries.
14. Utility power supplied to the unit
MUST
match power requirements listed on the unit label.
15.
Always disconnect power to the unit before performing any service or maintenance
.
16. Read and follow all notices and warnings on the unit.
17.
SAVE THESE INSTRUCTIONS.
SAFETY WARNINGS
• All personnel should be alerted to the potential hazards indicated by the product safety labeling on this unit.
• The following conventions are used to indicate and classify precautions in this manual and on product safety labeling. Failure to
observe precautions could result in injury to people or damage to property.
!
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
This symbol is used to identify the need
to wear protective gloves.
Caution indicates a
POTENTIALLY
hazardous situation, which, if not avoided,
MAY
result in minor or moderate injury.
Caution used without the safety alert
symbol indicates a potentially hazardous
situation, which, if not avoided, may result
in property damage.
This symbol is used to identify a
GERMICIDAL
ULTRAVIOLET LIGHT
hazard.
This symbol is used to identify an
ELECTRICAL
SHOCK
or
ELECTROCUTION
hazard.
Warning indicates a
POTENTIALLY
hazardous situation, which, if not avoided,
COULD
result in death or serious injury.
This symbol is used to identify the need to wear
approved germicidal ultraviolet blocking eyewear.
This symbol is used to identify the need to wear
approved germicidal ultraviolet blocking face shield.
This symbol is used to identify components which must
not be disposed of in trash
Danger indicates an
IMMINENTLY
hazardous situation, which, if not avoided,
WILL
result in death or serious injury.
