Atlantic Ultraviolet Mighty Pure MP16A, Руководство пользователя, Страница: 15 / 24

15
TROUBLESHOOTING
WARNING: Always disconnect power to the water puri fi er before performing any service or maintenance.
IMPORTANT: This unit is to be serviced ONLY by quali fi ed, and appropriately licensed, personnel.
Table 3 - Troubleshooting
Problem Possible Cause Corrective Action
Puri fi er not operating No electrical power....
Verify that the puri fi er is connected to a live power
source.
Water leaking into/from puri fi er.
Cracked or broken quartz sleeve...
Shut down puri fi er, drain, and replace quartz
sleeve. See “Quartz Sleeve Installation, Cleaning
or Replacement” in the “Maintenance” section
Quartz sleeve sealing o-ring (s) worn,
damaged...
Shut down puri fi er, drain, and remove static gland
nut, replace sealing o-ring. See “Quartz Sleeve
Installation, Cleaning or Replacement” in the
“Maintenance” section
Poor, or loose, connections or fi ttings
Tighten suspect connection or fi tting; or shut down
purifi er, drain, and remove fi tting or connection.
Clean threads; reapply thread sealing tape and
reinstall.
Poor puri fi er performance AND/OR Low UV intensity (As
indicated on optional Guardian TM Ultraviolet Monitor)
Quartz sleeve fouled...
Clean quartz sleeve, see “ Quartz Sleeve
Installation,Cleaning or Replacement ” in the
“ Maintenance ” Section.
Sensor Probe, if equipped, lens or
quartz rod fouled...
Clean lens or Quartz Rod, see “ Optional
Ultraviolet Monitor Sensor Probe Cleaning ” in
the “ Maintenance ” section
Germicidal lamp output depreciating...
Replace lamp, as it nears its end of life (EOL) .
See “ Lamp Installation or Replacement ” in the
“ Maintenance ” section.
Germicidal lamp not functioning...
Replace lamp. See “ Lamp Installation or
Replacement ” in the “ Maintenance ” section
Low input voltage... Verify input voltage to puri fi er.
Change in water quality....
Have water tested to con fi rm that it does not
exceed maximum recommended concentration
levels for use with this puri
fi er.