Chapter three: System debugging and operation
3.1 System debugging
If no abnormalities are discovered in the careful inspections done following system
connection, the system may be powered on for debugging. The main content of debugging
includes the login and tests of detectors and modules, the settings of the bus manual control
panels, the multi-line linkage control units, the linkage relations, etc.
3.2 Directions for system operation
3.2.1 Panel functions
The layout of the
CFT-QGL-9000
panel is shown in the figure below.
CFT -QGL-9000E FIRE ALARM CONTROL PANEL
PERMIT
POWER
FIRE
START
FEEDBACK
FAULT
PRHB.
SYSTEM FAULT
SURVEILLANCEALARM
OPERATIONDELAY
POWER FAULT
HO
/
RN STROBEFAULT
C MN AOM U IC TION
SURVEILLANCEFAULT
SYST TESTEM
AUTO
MANUAL
K OREYB A D
ISO TIOLA N
GN AE ER LL KGIN A E
R ETES
SO N ERUDLIN A EKG
SELE TC
SSE T SY T ME T
MN AAU L
C N IROF M
CNEA CL
P N M TEA EL U
O TSIDUEM TEU
Fig.3-1 Layout of the Panel
The panel design includes the basic functions regarding alarm query and control. Hereunder
are detailed introductions to the figure above.
Indication function zone:
FIRE
ALARM
POWER
STARTUP
FEEDBACK
TROUBLE
SYSTEM
FAULT
OPERATION
DELAY
POWER
TROUBLE
S&L
TROUBLE
SELF-TEST
Fig.3-2 Indication Function Zone
No.
Silk screen
printed
POWER
Color
of the
light
Green
Function description
It will be lit after the mainboard is normally powered
on by the power supply source of the fire alarm
control panel (or the emergency power supply
- 11 -
01
