13
You may not start to operate the machine until
you have read these operating instructions,
observed all the instructions given and instal-
led the machine as described!
Keep the instructions in a safe place for future use.
Contents
EC Declaration of Conformity
1
Extent of delivery
13
Characteristic noise values
13
Symbols on the machine / in the operating instructions
13
Description of device / spare parts
14
Proper use
14
Residual risks
14
Safe working
15
Assembly 16
Preparing for startup
17
Start-up 17
Settings on the saw
18
Working with the saw
18
Maintenance and cleaning
20
Transport 21
Storage 21
Possible faults
22
Specifications 23
Guarantee 23
Extent of delivery
•
Band saw BSV 315
(pre-assembled device unit)
•
Parallel stopper
•
Saw band
•
Pushstick
•
Saw table
•
Fastener bag
•
Table insert
•
Operating instructions
•
Stopper guidance profile
•
Assembly and operating
instruction sheet
After unpacking, check the contents of the box for
!
completeness
!
possible transport damage.
Report any damage or missing items to your dealer, supplier
or the manufacturer immediately. Complaints made at a later
date will not be acknowledged.
Characteristic noise values
DIN EN ISO 3744
Application of the machine as band saw with standard saw
band.
Sound power level Sound pressure level at
the workplace
No-load L
WA
= 80.8 dB(A)
L
pA
= 70.1 dB(A)
Load L
WA
= 100.7 dB(A)
L
pA
= 89.3 dB(A)
Measuring uncertainty K: 3 dB(A)
The values given are emission values and must therefore not simultaneously
represent safe workplace values too. Although there is a relationship be-
tween emission and immission levels, it can be reliably deduced whether
additional precautionary measures are necessary or not. Factors, which can
influence the immission level currently existing at the workplace include the
duration of the effects, the special type of the workroom, other noise
sources, etc. e.g. the number of machines and other adjacent processes.
The permissible workplace values can also vary from country to country.
This information should however enable an improved assessment of the
danger and risk to be carried out.
Symbols on the machine
Read and follow the operating instructions
and safety advices before starting up the
machine.
Wear eye and ear protection.
Wear dust mask.
Switch off the motor and disconnect the
mains plug before performing cleaning, main-
tenance or repair work.
Do not expose to rain. Protect against
humidity.
Risk of injuries of fingers and hands by the
saw band.
This product complies with European regula-
tions specifically applicable to it.
Electrical devices do not go into the domestic
rubbish. Give devices, accessories and pack-
aging to an ecofriendly recycling.
According to the European Directive
2002/96/EC on electrical and electronic
scrap, electrical devices that are no longer
serviceable must be separately collected and
brought to a facility for an environmentally
compatible recycling.
Symbols operating instructions
Potential hazard or hazardous situation
. Failure to
observe these instructions may lead to injuries or cau-
se damage to property.
L
Important information on proper handling
. Failure
to observe these instructions may lead to malfunction.
User information.
This information helps you to use
all the functions optimally.
Assembly, operation and servicing
. Here you are
explained exactly what to do.