12
Longer power supply cables will cause a drop in voltage.
The motor will not be able to provide its maximum
performance and the operation of the machine will be
impaired.
The coupling in the connection lead must be splashproof.
When laying the
connecting attachments
, be sure that
they do get crushed or bent, and that the plug-and-socket
connection does not get wet.
Do not use the
cable
for purposes for which it is not
meant.
Protect
the cable against
heat, oil and sharp
edges
. Do not use the cable to pull the plug from the
socket.
Regularly check the
extension cables
and replace them if
they are damaged.
Do
not use any defective connection cables.
When working outdoors, only use extension cables
especially
approved
and appropriately labelled for
outdoor use.
Do
not set up any provisional
electrical connections.
Never bypass
protective devices or deactivate them.
The
electrical connection
or
repairs
to electrical parts
of the machine must be carried out by a certified
electrician or one of our customer service points. Local
regulations – especially regarding protective measures –
must be observed.
Repairs
to other parts of the machine must be carried
out by the
manufacturer
or one of his customer service
points.
Use only original
spare parts. Accidents can arise for the
user through the
use of other spare parts
. The
manufacturer is not liable for any damage or injury
resulting from such action.
S
S
t
t
a
a
r
r
t
t
-
-
u
u
p
p
Check
that the machine is completely and correctly
assembled.
Before using the shredder
, make sure each time that
−
there are no faulty connections (tears, cuts, etc.)
−
there are no damage at the machine
−
all screws are tight
−
check the hydraulic system for any possible leaks
L
Mains connection
Compare the voltage given on the machine model plate
e.g. 230 V with the mains voltage and connect the
machine to the relevant and properly earthed plug.
Only use
connection cables
with sufficient diameters.
Do
not use any defective connection cables.
Connect the machine via a
30 mA
fault current safety
switch.
L
Fuse protection: 10 A
W
W
o
o
r
r
k
k
i
i
n
n
g
g
w
w
i
i
t
t
h
h
t
t
h
h
e
e
v
v
a
a
c
c
u
u
u
u
m
m
c
c
l
l
e
e
a
a
n
n
e
e
r
r
additional SAFETY INSTRUCTIONS
The machine may only be operated by persons over the
age of 16 years, and who have read and understood these
operating instructions.
Wear your safety gear (goggles/vizor, gloves) for
protection from possible injuries.
Never aim the suction/blowing pipe at people or animals.
Never blow objects in the direction of people of animals.
Spectators must observe safety clearance of min. 5 m.
Beware of swirling and flying objects.
Be particularly
aware of recoiling effects from brickwork or house walls.
Before starting work, check the working area, and
while working, beware of foreign bodies (e.g. stones).
Do not operate the machine with wet hands or during
damp weather.
Keep your hands and feet out of the way of the rotating
impeller.
Always ensure that the connection lead runs back away
from the machine. Otherwise there is a risk of stumbling,
slipping or falling.
Fasten the connection lead at the back of the machine.
Never use the machine
−
without the bag,
−
without closing the zip fastener of the bag
L
The garden vac only works when the cleaning flap
has been closed (safety cutout).
What can I vacuum and blow?
YES
light, dry materials, e.g. dry leaves and garden waste such as
grass, small twigs and pieces of paper
NO
heavy materials such as metal, stones, branches, fir cones or
broken glass
Do not use the machine to vacuum or blow any
burning, explosive or smoking items such as
cigarettes, matches or hot ash.
Do not vacuum or blow any liquids, in particular
flammable liquids such as fuel. Do not use the
machine in the vicinity of such substances.
Содержание 2100
Страница 97: ...90 ...
